- Product Overview
- Leak Detection
- Electronic Leak Detectors
- TRITECTOR-RCT
4688374
3-in-1 Leak detector with easily replaceable sensors, all common refrigerants, combustible gases and tracer gases can be detected with only one device
The TRITECTOR™ is the practical 3-in-1 solution for the professional refrigerationengineer – with easily replaceable sensors, all common refrigerants, combustible gasesand tracer gases can be detected with only one device. The adjustable sensitivity levelsfind even the smallest leaks, and the ambient concentration is continuously compensatedautomatically or can also be compensated manually. As soon as a leak is detected, thecolor LCD display gives a visual signal and an optional sound is emitted. As with otherREFCO products, either AA batteries or Micro-USB supplies power - making annoyingdelays caused by dead batteries a thing of the past.
- Intuitive handling
- Intelligent electronics that automaticallydetect the connected sensor
- Exchangeable sensors for refrigerants,combustible gases and tracer gases
- Variable power supply (batteries & USB)
- Automatic and manual reset of theambient concentration
- High quality LCD display
- Technical Data
Sensitivity
Refrigerant [R]: 0.04 oz/yr R134a | Combustible gas [C]: 0.04 oz/yr R290, < 5 ppm methane | Tracer gas [T]: 0.1 oz/yr
Measurement Technology
Metal-oxide-semiconductor
Refrigerant Type
Refrigerants | CFC | HCFC | HCF | HFO | Combustible gases | Tracer Gas
Tube Length
16 ″
Sensor Lifetime
10 y
Warm-up Time
45 s
Operating Hours
12 h
Ingression Protection
IP41
Battery
4 x AA | Alternative Power Supply USB Mirco-B
Functions
Sensor exchange
Ambient concentration reset:
- automatic
- manual
Peak = peak function indicates maximum measured value
Auto shut off
Sensitivity Level:
- low
- medium
- high
Mute functionOperating Temperature Range
+14 °F to +122 °F
Humidity Range
See AlsoFinding Tough A/C Leaks with the Bullseye Leak DetectorSingle In-Line Leak Detector | Krowne0 - 90 % relative humidity (no condensation)
Storage Temperature Range
-4 °F to +140 °F
Scope of Supply
Batteries | Case | Instruction manual
Packaging
Sturdy plastic case
Material
ABS | TPE
Color
yellow | green
Standards
Refrigerants: EN-14624:2012, SAE J1627, SAE J2791, SAE J2913
Combustibles: BS 7348
Hydrogen: SAE J2970, EN 35422RoHS Conformity
Yes
- Logistics
Net Weight [kg]
0.39
Net Width [mm]
78
Net Height [mm]
48
Net Depth [mm]
260
Gross Weight [kg]
1.62
Gross Width [mm]
198
Gross Height [mm]
97
Gross Depth [mm]
420
Packing Weight [kg]
1.23
Customs Tariff Number
9027.1000
- Documents and Media
Product Data Sheet
Create Now
Instruction manual
PDF
Conformity declaration
PDF
Media
- Accessories
- Spare Parts
R-SENSOR
Spare sensor for combustible gas
Item Nr. 4688370
C-SENSOR
Spare sensor for combustible gas
Item Nr. 4688371
T-SENSOR
Tracer gas sensor
Item Nr. 4688372
TRITECTOR-FILTER/5
Replacement filter for TRITECTOR, 5 pieces
Item Nr. 4688367
TRITECTOR-CASE
Item Nr. 4688364
Back to overview
Further Products
HY-TELL
4688017
Hydraulic pipe bender
SW-127-C
4687626
Ratchet wrench
New
A-38010
4687957
Access control valve 1/4" SAE x 1/4" SAE
New
REFMATE-4-CA-WTC-V
4688132
Digital 4-way manifold with 3 charging hoses with ball valves, 3/8" vacuum hose, 2 K-Type temperature sensor, 2 wireless temperature clamp and wireless digital vacuum gauge
14225
9881560
Pocket mirror
New
REFMATE-2-CA-WTC-V
4688128
Digital 2-way manifold with 3 charging hoses with ball valves, 2 K-Type temperature sensor, 2 wireless temperature clamp and wireless digital vacuum gauge
DV-45
4495358
Oil for vacuum pumps RL-2/8 and ECO series
14142
9881562
Fin comb, with extra spare head
FAQ
Questions about Product
- Is TRITECTOR suitable for R744 (CO2)?
No, if R744 (CO2) is to be detected, the CO2-LOCATOR (4687990) from REFCO must be used.
- Which REFCO product can replace the TRACE-LOCATOR?
The TRACE-LOCATOR (leak detector for tracer gas) can be replaced by the TRITECTOR-T (yellow sensor).
- Which refrigerants are detected by the various TRITECTOR-RCT SENSORS?
R-SENSOR /Refrigerant: 1 g/a / 0.04 oz/a R134a
C-SENSOR / Combustibles: 1 g/a / 0.04 oz/a R290; < 5 ppm methane
T-SENSOR / Tracer gas: 3 g/a / 0.1 oz/a
- Why does REFCO use batteries instead of rechargeable batteries in their products?
All our REFMESH products can be battery-operated. They require 1.5V AA or AAA batteries. We deliberately avoid using rechargeable batteries since they need to be charged before a device can be used when depleted. Most service technicians have batteries on hand or can purchase them nearby. For long-term measurements, REFCO devices can also be operated with an external power source via the USB interface. The exceptions here are the REFCLAMP devices.
- Is the REFMATE updatable for new refrigerants?
Yes, REFCO provides all refrigerants and updates free of charge. The new refrigerants are made available through the REFMESH app (Settings --> REFCO Device Updates).
- Can REFCO's leak detectors and their sensors detect helium (R-704)?
Helium (R-704) is a refrigerant and can be used as a forming gas, but is not flammable.
Helium (R-704) cannot be detected by REFCO's leak detectors and their sensors.
Highlight
The purchase of a REFCO RL vacuum pump is an investment for life if regularly inspected.
more information
News
29. August 2024
REFCO celebrates 50 years of company history
More information
25. February 2024
Our Kaizen journey continues
More information
26. January 2024
AHR Expo Chicago ‒ a great start to the 2024 exhibition year
More information
